Gutter installation in Dallas-Fort Worth costs about $8 to $15 per linear foot for 6-inch seamless aluminum gutters in 2026. Most DFW homes need 150 to 200 feet of gutter, so a full system usually runs $1,200 to $3,000.
This guide breaks down DFW gutter prices by material, gutter size, and home size. It also shows where cheap quotes cut corners, so you can compare bids line by line.
Gutter Nation is a family-owned gutter company based in Flower Mound. Our W-2 crews handle seamless gutter installation across the Metroplex, with 6-inch gutters as our standard.
Key takeaways
- Seamless 6-inch aluminum gutters cost about $8 to $15 per linear foot installed in DFW.
- A typical DFW home with 150 to 200 feet of gutter pays about $1,200 to $3,000.
- Moving from 5-inch to 6-inch gutters adds about $1 to $3 per linear foot.
- Old gutter removal adds about $150 to $300, and a second story adds about $1 to $3 per foot.
- In Texas, a contractor who offers to waive your insurance deductible is breaking state law.
How much does gutter installation cost in DFW?
Most DFW homeowners pay $8 to $15 per linear foot for 6-inch seamless aluminum gutters, installed. That price usually covers the gutters, downspouts, hangers, and labor.
Material sets the base price, so here is how common gutter types compare in North Texas.
2026 DFW gutter installation cost per linear foot
| Gutter type | Installed cost per linear foot | Best fit |
| Vinyl, sectional | $3 to $5 | Sheds and DIY jobs. Vinyl can crack in Texas heat. |
| Aluminum, sectional, 5-inch | $4 to $8 | Short runs on tight budgets |
| Seamless aluminum, 5-inch | $6 to $12 | Small, simple, low-pitch roofs |
| Seamless aluminum, 6-inch | $8 to $15 | Most DFW homes. Gutter Nation’s standard. |
| Seamless galvanized steel | $8 to $20 | Homes in harder-hit hail areas |
| Half-round aluminum, 6-inch | $12 to $30 | Historic, Tudor, and custom homes |
| Copper | $25 to $50 | High-end and historic homes |
Ranges combine 2026 Dallas cost data from Angi and HomeBlue with HomeGuide’s national seamless gutter figures.
Your total depends mostly on how many feet of gutter you need. Single-story homes sit near the low end of each range. Two-story homes and complex rooflines sit near the high end.
Estimated total cost for 6-inch seamless aluminum gutters in DFW
| Home type | Typical gutter footage | Estimated installed cost |
| Single-story ranch, simple roofline | 120 to 150 feet | $960 to $1,950 |
| Typical DFW home, one or two stories | 150 to 200 feet | $1,200 to $3,000 |
| Two-story home, complex roofline | 200 to 250 feet | $2,000 to $3,750 |
Online gutter prices don’t agree, and the gap can top $2,000. Angi’s 2026 Dallas data lists an average project of $1,054. NerdWallet puts the national average for a typical home near $4,000.
Those figures do not describe the same job. They differ on gutter size, material, footage, and what the price includes. Your own written quote is the only number that fits your house.
What affects your gutter price?
Five things set most of your gutter price: linear footage, gutter size, number of stories, roofline complexity, and prep work. Prep work means taking down old gutters and fixing rotted fascia.
| Cost factor | Typical DFW price impact |
| Linear footage | Price scales with every foot. Most homes need 150 to 200 feet. |
| Gutter size, 5-inch to 6-inch | About $1 to $3 more per linear foot |
| Second story | About $1 to $3 more per linear foot |
| Old gutter removal | About $150 to $300 per home |
| Corners, valleys, and roof angles | More corner joints and more labor |
| Downspouts | Most homes need one downspout per 30 to 40 feet of gutter |
| Fascia repair | Priced after inspection, only if rot is found |
| Gutter guards | About $6 to $13.50 more per linear foot |
A few of these factors hit harder in North Texas. DFW storms drop a lot of rain in a short burst, and our region sits on clay soil that swells when wet.
When gutters overflow, that water soaks the soil next to your slab. Gutter size and downspout placement protect your foundation, so they are poor places to save money.
Rotted fascia adds cost, but it also has to be fixed first. New gutters need solid wood to hang from. Gutter Nation handles soffit and fascia repair before the gutters go up.
How much more do 6-inch gutters cost than 5-inch?
Six-inch gutters cost about $1 to $3 more per linear foot than 5-inch gutters. On a 150-foot home, the upgrade adds about $150 to $450.
That extra money buys real capacity. A 6-inch K-style gutter carries about 40 to 50 percent more water and drains through downspouts twice as large.
| Spec | 5-inch K-style | 6-inch K-style |
| Standard downspout | 2×3 inch | 3×4 inch |
| Downspout drain area | About 6 square inches | About 12 square inches |
| Relative water capacity | Baseline | About 40 to 50 percent more |
| Added installed cost | Baseline | About $1 to $3 per linear foot |
Labor stays nearly the same, because the same crew runs the same machine. Some national cost guides list a bigger price jump. If a quote shows a large labor premium for the upgrade, ask why.
Gutter Nation’s standard is 6-inch seamless gutters with 3×4 downspouts. We still recommend 5-inch gutters for small, simple, low-pitch roofs. Our 6-inch vs 5-inch gutter sizing guide shows the full math for North Texas rainfall.
Is the seamless gutter premium worth it?
Yes, the seamless premium is worth it for most DFW homes. Seamless aluminum gutters cost roughly 30 to 50 percent more than sectional gutters. On a typical DFW home, that works out to about $500 to $900.
A seamless gutter is one continuous run of aluminum, formed on site to the exact length of your roofline. Sectional gutters come in pieces, usually 10 feet long, joined with sealant at each overlap.
A 180-foot home with sectional gutters has about 17 of those in-line joints. Seamless runs only have joints at corners and downspout outlets.
Those joints matter here, because North Texas swings from triple-digit summer days to freezing winter nights. Aluminum grows and shrinks with every swing, and sectional joints take that stress daily. Over time the sealant fails, and the joints start to leak.
On a 180-foot home, the premium runs about $720. Spread over the 20-year life the National Association of Home Builders gives aluminum gutters, that is about $36 a year.
One service call to reseal leaking joints can cost more than that. For the full breakdown, read our guide on whether seamless gutters are worth it.
What do gutter guards add to the cost?
Gutter guards add about $6 to $13.50 per linear foot in Dallas, based on Angi’s 2026 data. On a 150-foot home, that comes to roughly $900 to $2,000.
Price depends on the guard type, your gutter size, and whether you install guards with new gutters. Six-inch gutters use wider guard sections, so they run slightly more per foot.
Gutter Nation installs LeafBlaster Pro micro mesh gutter guards, made by Gutterglove. The stainless steel mesh blocks oak leaves, pecan husks, pine needles, and shingle grit. Gutterglove backs the mesh with a 40-year limited parts warranty that moves with the house if you sell.
Guards pay off fastest on homes under mature trees. Most homes with guards drop from two or three cleanings a year to about one. Gutter cleaning in DFW often runs $150 to $450 per visit.
Gutter guards still need a little care from you. In spring, you may have to brush pollen off the mesh.
If your gutters are already in good shape, we can often add gutter guards without replacing them.
Why does the cheapest gutter quote usually cost more later?
The cheapest quote usually wins by cutting the spec. When those gutters fail early, you pay for removal and a second full install.
Low bids tend to cut corners in the same places:
- They quote 5-inch gutters and 2×3 downspouts that overflow in North Texas downpours.
- They use sectional pieces instead of seamless runs.
- They skip drip edge work, so water runs behind the gutter and rots the fascia.
- They hang new gutters on rotted fascia boards.
- They send subcontracted crews that you never get to meet.
- They leave gauge, gutter size, and downspout count off the written quote.
Here is a simple example of how that plays out. A low bid saves you $600 on a 180-foot home, but the system fails in 8 years instead of 20.
Now you pay for removal plus a new system, about $1,600 to $3,000 at today’s prices. That $600 in savings costs you far more, before any fascia or foundation repair.
Look for these signs you need gutter replacement before small leaks turn into big repairs.
Watch for storm-chaser quotes in Texas
After hail, out-of-town crews knock on DFW doors with fast, cheap offers. The Texas Department of Insurance (TDI) warns homeowners about the tricks they use.
- Deductible offers: Texas law makes it illegal for a contractor to offer to waive, absorb, or rebate your insurance deductible. TDI’s roofing and insurance guide cites Texas Insurance Code Chapter 707.
- Upfront payment: TDI advises homeowners never to pay in full before the work starts. After a declared disaster, TDI notes that out-of-town crews can’t legally ask to be paid first.
- Written bids: TDI’s contractor scam tips say to get bids in writing, hire local, and check references.
You can report a contractor who offers to waive a deductible to the Texas Attorney General.
How do you get an accurate gutter quote?
Get a written quote, made on site, that lists every spec. Then compare each quote line by line before you look at the total.
Follow these steps before you sign anything:
- Book an on-site measurement. Phone quotes have to guess at your footage.
- Get the gutter size, aluminum gauge, and downspout size and count in writing.
- Confirm the quote includes old gutter removal, haul-off, and drip edge work.
- Ask who installs the gutters, W-2 employees or subcontractors.
- Get the terms of both warranties in writing, for the work and the parts.
- Pay when the work is done and you have checked it.
Not sure what to ask a gutter contractor? Our guide on choosing a gutter company or a roofing company lists the questions that expose weak bids.
Gutter Nation follows the same process we recommend. We measure your roofline on site and give you a flat-rate written quote, often the same day.
Most gutter installs finish in a single day. You do not pay until you are satisfied with the work.
Gutter installation cost FAQ
How much do gutters cost per foot in DFW?
Seamless 6-inch aluminum gutters cost about $8 to $15 per linear foot installed in DFW. Seamless 5-inch aluminum gutters run about $6 to $12 per foot. Copper gutters cost $25 to $50 per foot.
How much do gutters cost for a 2,000-square-foot house?
Gutters for a 2,000-square-foot DFW house usually cost about $1,200 to $2,700 for 6-inch seamless aluminum. Gutter footage matters more than the home’s square footage. A 2,000-square-foot home often needs 150 to 180 feet of gutter.
How much does 100 feet of gutter cost to install?
Installing 100 feet of 6-inch seamless aluminum gutter costs about $800 to $1,500 in DFW. Small jobs may carry a minimum charge, so the per-foot price can run higher.
Does gutter replacement cost more than new gutter installation?
Gutter replacement usually costs about $150 to $300 more than a first-time install. That covers removing and hauling off the old gutters. Replacement also costs more if the fascia behind the old gutters has rotted.
Can I add gutter guards to my existing gutters?
Yes, if your existing gutters are in good shape and sloped correctly. Gutter guards cannot fix gutters that sag, leak at the seams, or pitch toward the house. Gutters with those problems need to be replaced first.
Get a transparent, no-pressure gutter quote
Gutter Nation gives every DFW homeowner a clear, line-by-line price before any work starts. We measure your home and put the full spec in writing, with no pressure and no upsells.
Before you call, browse our reviews from DFW homeowners.
