Stop Clogged Gutters with LeafBlaster Pro in the DFW Metroplex
Professional LeafBlaster Pro gutter guard installation in DFW for clog-free, worry-free protection.
Oak leaves, pecan husks, shingle grit, and that cottonwood fluff that shows up every spring have one thing in common. They all end up in your gutters. Once the flow stops, water backs up under your fascia, overflows onto your foundation, and starts the cascade of problems every homeowner in North Texas knows about.
LeafBlaster Pro is the stainless steel micro mesh gutter guard Gutter Nation installs across the Dallas-Fort Worth Metroplex to stop debris at the gutter line. This page covers how it works, what it keeps out, how it stacks up against ONE Gutter Guards and other options, and what to expect from a Gutter Nation installation.
What LeafBlaster Pro is and how it works
LeafBlaster Pro is made by Gutterglove, one of the original micro mesh gutter guard manufacturers. It has three working parts:
Stainless steel micro mesh:
The mesh opening is around 540 microns, small enough to block pine needles, shingle grit, and seed pods. Stainless steel does not rust or warp in Texas heat, and it does not degrade under UV.
Aluminum extruded frame:
The frame stiffens the gutter itself and gives the mesh a stable platform through heavy rain and thermal cycling.
Z-bend and trough technology:
The mesh has a raised Z-shaped fold that lifts debris up off the flat surface so wind can clear it. A front trough pulls water straight into the gutter instead of letting it sheet over the edge during heavy downpours.
The product carries a 40-year transferable limited parts warranty and works with every common residential roof type. One thing worth knowing upfront: LeafBlaster Pro is a contractor-only product. Gutterglove does not sell it direct to homeowners through big-box stores. You install it through a professional contractor like Gutter Nation, or you don’t install it.
The DFW debris LeafBlaster Pro actually blocks
Most gutter guard comparisons skip over the local details. That matters here because North Texas homeowners deal with a specific debris mix.
- Live oak and red oak leaves: Large and waxy. Sit on top of the mesh and blow off in summer storms.
- Pecan husks and shells: Common in older Dallas and Fort Worth neighborhoods. Too big to fit through the mesh, easy to brush off from the ground with an extension pole.
- Sweetgum balls: Perfect clog size for open gutters. The mesh stops them cold.
- Pine needles: Slim enough to pass through cheap screens but blocked by 540-micron micro mesh.
- Shingle grit: Washes off your roof every storm. The micro mesh filters it out so it never packs into a dam near your downspout.
- Cottonwood fluff: Spring nuisance in North Texas. LeafBlaster Pro catches most of it, though very heavy cottonwood seasons can mat the surface and need a quick brush off.
- Oak pollen: Caked in spring. Rinses clear with a hose or your next rain.
On top of the debris side, LeafBlaster Pro also keeps out wasps, mud daubers, birds, and rodents looking to nest in your gutters, which is a real problem in older homes across the Metroplex.
LeafBlaster Pro vs ONE Gutter Guards, LeafFilter, and LeafGuard
Three micro mesh products come up most often when DFW homeowners shop gutter guards: LeafBlaster Pro, ONE Gutter Guards, and LeafFilter. LeafGuard is a one-piece full gutter replacement and sits in a different category.
Here is how the core options compare:
Feature | LeafBlaster Pro | ONE Gutter Guards | LeafFilter |
Material | Stainless steel micro mesh + aluminum frame | Stainless steel mesh + aluminum chassis | Stainless steel micro mesh + uPVC frame |
Mesh opening | 540 micron | Multiple mesh options | 275 micron |
Fits existing gutters | Yes | Yes | Yes |
Manufacturer warranty | 40-year transferable parts | Lifetime material | Lifetime transferable |
Fire rated | ASTM E2768 and E84-19b | Not published | Not published |
Sales model | Pro contractors only | Authorized dealers | Direct-to-consumer sales |
Pricing | Typically more affordable installed | Premium tier | Premium tier with high-pressure sales |
The short version for most DFW homeowners:
- LeafBlaster Pro and ONE Gutter Guards use comparable stainless steel micro mesh. The material and performance are in the same class.
- LeafBlaster Pro is usually priced lower when installed by a local contractor. You are not paying a dealer markup layer or a national brand's marketing budget.
- Gutter Nation handles the install directly. You call us, we measure, we quote, we install. No subcontractors, no pushy in-home sales.
You can install any of these products and get years of clog-free service. The question is what you want to pay and who you want accountable for the install.
Two features most comparisons miss: fire resistance and rainwater harvesting
LeafBlaster Pro has two features that do not show up in most side-by-side tables.
Fire resistance:Â LeafBlaster Pro passed ASTM E2768 and E84-19b surface burning tests. The stainless steel mesh limits the surface spread of flame for at least 30 minutes. In a region that sees dry summers and the occasional brush fire, a gutter full of dry leaves is kindling. A mesh guard that resists ignition is a real, if understated, benefit.
Rainwater harvesting compliance:Â The 540-micron mesh meets ANSI 63-2013 for rainwater pre-filtration. If you collect rainwater for irrigation or any other use, LeafBlaster Pro filters debris out before it reaches your barrel or cistern. Texas homeowners running rainwater systems skip the separate pre-filter step with this product.
Neither of these will sell you on the product by itself. Both are reasons to pick LeafBlaster Pro over a cheaper plastic or foam insert that does neither.
What LeafBlaster Pro won't do
Honest version, because marketing pages that pretend the product is perfect usually aren’t.
- It is not truly maintenance-free:Â No micro mesh guard is. In heavy pollen seasons or after cottonwood snow, you may need to brush the top with an extension pole from the ground. Gutterglove sells a brush accessory designed for this. We can include one on request.
- Very fine debris can sit on top:Â If your house is surrounded by cottonwoods or mature pines dropping thick needles every week, debris can pile up on the mesh surface faster than wind clears it. In those situations the mesh still protects your gutter, but the top needs occasional clearing.
- It will not fix gutters that are already broken:Â If your gutters sag, leak at the seams, or pitch backward toward the house, a guard cannot solve that. We flag this during estimates and recommend new seamless gutter installation when it is the right call.
- It won’t stop algae on the mesh surface:Â In shaded, humid spots the mesh can grow a thin green film. It washes off with a garden hose.
The win is still strong. You move from cleaning gutters three or four times a year to occasionally brushing the top of the guard. For most DFW homeowners, that is the goal.
LeafBlaster Pro installation across the DFW Metroplex
Gutter Nation installs LeafBlaster Pro as part of a full gutter system on new builds, as a retrofit on existing gutters in good condition, or as an upgrade during gutter replacement.
We install daily across the Metroplex:
- North Dallas corridor:Â Dallas, Plano, Frisco, Richardson, Carrollton. Newer construction with younger tree canopies benefits most from shingle grit and pollen filtration.
- Fort Worth and mid-cities:Â Fort Worth, Arlington, Irving, Bedford, Euless. Established neighborhoods with mature pecans and oaks.
- Premium corridor:Â Southlake, Colleyville, Grapevine, Keller, Flower Mound. Larger homes often need 6-inch gutters with LeafBlaster Pro sized to match.
- North and west edges:Â Denton, Lewisville, Roanoke, Weatherford.
See the full service area map if your city is not listed above.
Installation is usually a half-day job on a single-family home. The crew inspects your existing gutters, cleans any debris inside, cuts LeafBlaster Pro to fit corners and downspouts, secures the sections to the front lip of the gutter, and leaves the work site clean.
Cost, warranty, and what to expect from Gutter Nation
Pricing for LeafBlaster Pro installed by Gutter Nation depends on three factors:
Linear feet of gutter
A single-story ranch is not priced the same as a two-story with multiple rooflines.
Gutter size
6-inch gutters use wider guard sections than 5-inch gutters and run slightly more per foot.
Scope
Retrofit on existing gutters is one number. New seamless gutters plus LeafBlaster Pro installed together is another.
We quote the exact number on-site after measuring your home. Every LeafBlaster Pro installation includes:
- Stainless steel micro mesh guards cut and secured to fit your gutter system
- Manufacturer 40-year transferable parts warranty from Gutterglove
- Gutter Nation workmanship warranty on the installation
- Cleanup of any debris pulled from your gutters during the install
If you want ongoing peace of mind, the Gutter Nation maintenance membership covers seasonal inspections and minor adjustments across the life of your system.
Frequently asked questions
Are gutter guards worth it in DFW?
Yes, if your home has any meaningful tree coverage or sees heavy shingle grit runoff. A quality micro mesh guard cuts gutter cleaning frequency from three or four times a year down to an occasional brush-off. The math works out in your favor inside three to four years for most Metroplex homes.
Can LeafBlaster Pro be installed on my existing gutters?
Yes, as long as your gutters are structurally sound, properly pitched, and not leaking at the seams. We inspect during the estimate and let you know if your current gutters are a good fit for a retrofit or if replacement makes more sense.
Will LeafBlaster Pro void my roof warranty?
LeafBlaster Pro can be installed without lifting shingles using a fascia-mount configuration. We match the install method to your specific roof and shingle manufacturer. Confirm with your roofer or shingle warranty documentation if you have concerns.
How often do LeafBlaster Pro gutter guards need maintenance?
Most homes need a top brush-off once or twice a year at most, usually after heavy pollen or cottonwood seasons. You never need to clean inside the gutter channel again.
How does LeafBlaster Pro compare to LeafFilter?
Both use stainless steel micro mesh with aluminum frames. LeafFilter uses a tighter 275-micron mesh, which can be more prone to pollen and fine dust caking. LeafBlaster Pro’s 540-micron mesh balances debris blocking with water flow, and typically costs significantly less once installed.
Does LeafBlaster Pro come with a warranty?
Yes. Gutterglove backs LeafBlaster Pro with a 40-year transferable limited parts warranty. Gutter Nation adds a workmanship warranty on the installation itself.
Get a free LeafBlaster Pro estimate
Stop cleaning gutters. Stop worrying about overflow the next time a Texas storm rolls through. A Gutter Nation technician can measure your home, walk you through the LeafBlaster Pro install, and give you a firm price the same day.
Request your free estimate or call to book a visit.